Have questions?
Always the correct part
We know our products
Mounting, Balancing
Fitment and Product Information:
Rear Coilover Bolt-In Brackets Kit for Quick Performance
Product Details:
Product Features and Description:
UMI's bolt-in rear coilover bracket kit is a complete mounting solution for your Quick Performance axle in your 1978-1988 GM G-Body. This race-proven lower bracket bolts in using the adjustable trailing arm mounting holes. This bracket features a multi-position design to allow further fine tuning of ride height and shock location (+ or -3/4"). In addition to shock location adjustability, the UMI 3054 features five positions of trailing arm location adjustment to match the Quick Performance adjustable lower control arm brackets. This adjustment is popular on lowered cars, for drag racing traction, or whenever a geometry change is desired. The kit also features upper reinforcement tabs to distribute the load from the T-bar as well as complete upper and lower hardware. There is no cutting required and your car can be returned to stock at any time.
Installation & Fitment Note: 3054 Coilover brackets are designed to fit Quick Performance 9" rear end housings ONLY and may not fit aftermarket rear ends. UMI recommends installing the 3054 bracket kit, setting the ride height as desired, then purchasing the correct length shocks. Rear shocks may not clear all exhaust tail pipes.
Coilover brackets are engineered specifically to pair with Quick Performance adjustable lower control arm brackets. The 3054 will also fit on the Quick Performance single hole non-adjustable bracket but will not have the ability to adjust the lower control arms. See picture provided above.
Key Features:
1/2" x 1-1/4" mount fits most standard racing shocks.
Upper T-bar reinforcement tab and hardware included.
100% Bolt in design features shock height adjustability.
Brackets manufactured entirely from 3/16" mild steel.
Laser cut for consistency and a precise fit.
Powder coated black for a long lasting finish.
Optional shock tower reinforcement brace available. (P/N 3055)
Optional Shock Tower Brace P/N 3055- P/N 3055 is designed to tie the left and right rear shock towers together for additional chassis reinforcement. UMI's P/N 3055 has been designed to clear most popular exhaust systems however fitment with all exhaust systems is not guaranteed.
Fitment and Important Notes About this Product:
The Wundercarparts 90 Day Warranty:
Wundercarparts offers a 90 day warranty against manufacturer defects on all items we sell! Additionally, most new items come with a separate Manufacturer warranty. Please message us through eBay for further information on the Manufacturer's warranty.
WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
You may return most new, unopened items within 30 days of delivery for a full refund. All Products must be sent back for return in New and Original Packaging.
EXCEPTIONS:Products shipped by truck freight, special orders, and some non-stocked items are all non-returnable. All Open-Box/Closeout items are sold AS-IS and are not returnable. Used, damaged, installed or altered items are non-returnable. No exceptions. Please contact the manufacturer directly for warranty issues.
If you receive incorrect or mis-shipped items in error (Ooops! We messed up!), it is still up to you to notify us within 10 business days so we can get the correct items re-shipped in a timely manner. (Prices, parts and in-stock items change often so we apologize in advance, but we must insist you open your shipments as they are delivered to see if they are correct.) If you fail to notify us within this timeframe, you will have to follow the normal 30 day return policy. Mis-shipped or incorrect items are not our responsibility after 30 days.
We are not responsible for damage claims when items are shipped to freight forwarding companies or other intermediaries and then forwarded on to another destination. The customer assumes all responsibility for the items they forward.
Contact WunderCarParts at 1-888-986-3373.Prepare your package in original packaging, with all parts, pieces and paperwork that were included when delivered.Return your item via your preferred shipping provider.
NOTE: If return is due to an improperly or incorrectly shipped item from WunderCarParts, your label will be freight-prepaid. All other returns are not pre-paid.
Upon receipt of your return, WunderCarParts will inspect your item and issue a refund according to WunderCarParts’s refund & restocking fee policy. Please ask prior to returning your part if a restocking fee is likely to apply. Some parts have a required 15-35% restocking fee based on manufacturer policies which we will charge to you and deduct from your refund or in-store credit. Refunds will take up to 10 days to process.
All cores are due within 30 days of purchase. You must follow the core return directions emailed to you upon purchase. Once your core return has been processed by the manufacturer, you will receive a full in-store credit immediately or full refund to the original credit card within 7-10 days for cores in usable condition, no exceptions. After 60 days of purchase, cores returned in good condition may be eligible for a full in-store credit or a refund less a 20% late fee. Expired cores in usable condition that are over 90 days from date of purchase may be eligible for a partial in-store credit only, less a 20% late fee.
** You are responsible for all core return shipping back to the manufacturer, along with insurance and tracking to verify the core arrived at the manufacturer. The manufacturer will inspect your core and make core credits based on their findings. If a core is un-buildable, they will adjust or deny your core accordingly. Core credits are NOT guaranteed. WunderCarParts is not responsible for delayed credits or lost/damaged cores.
All items shipped from WunderCarParts ship UPS or FedEx ground for free to the Lower 48 States.* Some items that are overweight, larger than normal, or special order, may incur additional freight charges. We strive to maintain accurate rates on our website, but at times, certain products will have modified freight, and will incur other charges, if this occurs, WunderCarParts will contact you to discuss the differences in costs or arrange a different shipping method if possible. *Excludes: Alaska/Hawaii, US Protectorates, APO/FPO, PO Box
Most of our items are shipped “Signature required”, requiring an adult to sign for the package upon delivery. If a shipment is refused or non-deliverable and is returned to us, the customer will be responsible for any re-delivery charges and restocking fees. WunderCarParts is not responsible for addresses deemed undeliverable or packages redirected for pick-up at an alternate location by the carrier.
UPS and FedEx maintain the option to REQUIRE a signature at the time of delivery, regardless of the recipient’s request to leave the package at the door. We make every effort to ship as requested by the customer, but the carrier reserves the right (as the responsible party) to make any changes based on the value of the shipment or other liability considerations.
We do not ship internationally at this time. However, you can purchase from our ebay store and use ebay global shipping.Ebay Store Ink: https://www.ebay.com/str/wundercarparts
If an item is inadvertently backordered, or must be drop shipped from a manufacturer, we will notify you via email or phone call once our warehouse notifies us. Please make sure we have a valid Email and Phone Number for you.
Some items are special order or come directly from the manufacturer. Delays in processing times or shipping can occur for these items. Your patience is appreciated.
Periodically, a part may be discontinued or temporarily unavailable that is listed on our website due to changes or production issues by the Manufacturer. We make every attempt to maintain current information and stock levels, but are not responsible for any manufacturing delays.
UMI Performance
Fitment and Product Information:Rear Frame Notching Kit, Weld In, For 1978-1988 GM G-BodyBrandname: UMI PerformancePart Number: 3061Description:UMIâs P/N 3061 G-body frame notch kit allows for...
UMI Performance
Fitment and Product Information:Solid Engine Mount Kit, For 1978-1988 GM G-BodyBrandname: UMI PerformancePart Number: 90059Description:The P/N 90059 solid engine mount kit for GM G-body cars places...
