Guaranteed Fitment
Always the correct part
click to zoom in
Have questions?
1-888-986-3373
Ask an Expert-
-
In-House Experts
We know our products
-
Added Value
Mounting, Balancing
LIQUI MOLY
LIQUI MOLY 1L Pro-Line Diesel Particulate Filter Cleaner - 20110
(No reviews yet)
Write a Review
MSRP:
$350.94
$182.41
(You save
$168.53
)
SKU:
LQM20110
UPC:
4100420201110
Condition:
New
Current Stock:
2
MPN:
20110
Core:
N
Core Price:
0
EPA:
N/A
LTL:
N
Proposition 65:
Y
5 customers are viewing this product
LIQUI MOLY 1L Pro-Line Diesel Particulate Filter Cleaner - 20110
MSRP:
$350.94
$182.41
(You save
$168.53
)
Cleaning is made with the compressed air gun for DPF (part no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945) or the DPF spray Probe long (part no. 20630). The diesel particle filter must be accessed depending on the vehicle type. In order to do this, the temperature or pressure sensor on the diesel particle filter must be removed on most vehicles. Observe: When cleaning, the particle filter's temperature should be below 40C (104F). On some vehicles the diesel particle filter is located near to the exhaust manifold or, optionally, the turbocharger, and not on the vehicle underbody. For safety reasons, utmost care must be taken when cleaning such vehicles - cleaning or flushing liquid may otherwise enter the combustion chamber through an open exhaust valve. The appropriate Pro-Line spray probe for the vehicle type is then fed into the particle filter through the opening. The full container of Pro-Line cleaner for diesel particle filters (1 liter) is sprayed directly onto the surface of the particle filter in intervals of 5 to 10 seconds (each with a break of 5 to 10 seconds in between) at an operating pressure of 6 to 8 bar. The probe must be rotated and moved back and forth during cleaning in order to cover as much of the filter surface with Pro-Line cleaner. The particle filter is then flushed with the full container of Pro-Line flushing liquid for diesel particle filters (500 ml). The compressed air gun for DPF (part no. 7946) is also used here at the same intervals as during the cleaning process. The particulate deposits are dissolved during the cleaning process and distributed around the diesel particle filter, where they can then be burned off as part of normal regeneration. After reinstalling the sensor, the service centre or workshop must trigger regeneration according to the manufacturers' instruction. Caution: The protective measures for safe handling can be found in the safety data sheet.
Related Products
LIQUI MOLY
LIQUI MOLY 500mL Pro-Line Diesel Particulate Filter Purge - 20112
MSRP:
$266.94
$35.81
Cleaning is made with the compressed air gun for DPF (item no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945). The diesel particle filter must be accessed...
LIQUI MOLY
LIQUI MOLY 500mL Pro-Line Diesel Cleaner - 2032
MSRP:
$191.94
$26.03
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the...
LIQUI MOLY
LIQUI MOLY 1L Motorbike Air Filter Cleaner - 20218
MSRP:
$116.94
$99.32
Place filter in a suitable vessel. Mix cleaner with water. Depending on the degree of contamination, the dosage must be between 1:5 and 1:10 (1 part cleaner to 5 to 10 parts water). Plunge the filter...
LIQUI MOLY
LIQUI MOLY 1L Marine Super Diesel Additive - 20552
MSRP:
$230.94
$21.47
Acombination of additives that clean and maintain diesel fuel systems. Prevents corrosion and increases lubrication thus reducing fuel pump and injector wear. Increases Cetane value for improved...
LIQUI MOLY
LIQUI MOLY 500mL Pro-Line Fuel Injection Cleaner - 2030
MSRP:
$191.94
$29.81
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the...